Malwa Belt FramingCanada Inc.
Home / Services / Garage Framing
Attached & detached

Garage framing.

Attached and detached. Long clear spans, tall door openings and trusses that carry Alberta snow load with no wall down the middle.

How we work

A garage is a big opening holding up a big roof.

Structurally a garage is an awkward building. You want the entire front wall to be a door opening, you want no posts in the middle, and the roof above it has to carry Alberta snow. Everything about that fights the easy way to build, which is why garage headers and truss bearing are where corners get cut on cheap builds.

The header over a double door is carrying most of the front of the building and it gets sized for that rather than for what looks about right. Trusses get set with proper bearing and braced before anything else happens on them. Detached garages add the question of what is being run out there, since a shop with a heater and a welder needs a different plan to a garage that parks two cars.

Attached garagesTied into the house structure and the existing wall properly.
Detached garagesFreestanding, from the sill plate up to the sheathing.
Door openingsHeaders sized for the span they are actually carrying.
Trusses and snow loadSet with correct bearing and braced before anything loads them.
Clear spansNo posts through the middle of the space you are trying to use.
Shop buildsFramed for what will actually run in there, not just parking.
Questions

Garage questions.

Wider than most people expect, but it depends entirely on what the roof above is carrying and the header specified for that span. Double and oversized openings are routine. The header gets sized to the actual load rather than to what looks about right.

The framing, yes, from the sill plate up through walls, trusses and sheathing. The slab and footings are a separate trade, and the framing has to suit what they pour, so it is worth getting the sequencing agreed before either of us starts.

Yes, and it is worth saying so at quoting stage. A shop that will run a heater, a hoist or heavy equipment has different requirements than a garage that parks two cars, particularly around bracing, ceiling structure and where services need to run.

Detached garages over a certain size generally do, and requirements differ between Edmonton and the surrounding communities. The permit is between you and the municipality rather than something we pull on your behalf. We frame to the approved drawings so the inspection is straightforward rather than a source of delay.

Also from Malwa Belt

Other scopes.

Contact

Talk to the crew.

Fastest way to get a number is a phone call with the drawings in front of you. The form works too.

Phone587.938.6601 Email[email protected]
Based inEdmonton, Alberta
Hours9am to 6pm
Request a QuoteMBF-GARAGE-FRAMI

Have plan sets? Email them to [email protected] after submitting. Plan files are usually too large to attach to a web form.

Request received

Thanks. We will get back to you shortly. If it is urgent, call 587.938.6601. Plan sets can be emailed to [email protected].